North Light 36-7153 Bruksanvisning

Läs gratis den bruksanvisning för North Light 36-7153 (5 sidor) i kategorin Lampa. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 5 recensioner. Har du en fråga om North Light 36-7153 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

ENGLISH

GREAT BRITAIN • CUSTOMER SERVICEtel: 020 8247 9300

internet: www.clasohlson.co.uk e-mail: customerservice@clasohlson.co.uk

postal: 10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ

Ver. 20180213

Pendant Light

Art.no 36-6651 Model OCL-764-Concrete-BK

36-6652 OCL-764-Concrete

36-6691 OCL-764-Marble-BK

36-6693 OCL-764-Marble-WH

36-6747 OCL-764-Concrete-Pink

36-7152 OCL-764 pimple

36-7153 OCL-764 pimple WH

Please read theentire instruction manual before using

theproduct and then save it for future reference.

We reserve theright for any errors in text or images

and any necessary changes made to technical data.

In theevent of technical problems or other queries,

please contact our Customer Services.

Safety

• All light fittings must be installed in accordance with

current safety regulations to prevent life-threatening

accidents. Installation should only be performed by those

with agood knowledge of electrical wiring. Contact

aregistered competent person or qualified electrician if

you do not possess therequired knowledge to perform

such aninstallation on your own. Follow theinstructions

carefully and keep them for future reference.

• Theceiling light is only meant to be used in clean, dry

indoor environments. Do not expose thelight fitting

to water, moisture or other liquids.

• Never attempt to repair or modify theceiling light in

any way.

• Only use adry cloth to wipe theceiling light clean

when needed.

• Thebulb can become very hot during use. Let it cool

completely before changing.

Warning symbols

For indoor

use only.

Class II luminaire.

Installation

Bulb: 220–240 V AC, E27, max 46 W (sold separately).

Note: If you are at all unsure about proper installation

procedures, seek theadvice of someone with

therequisite knowledge to help you perform such

aninstallation or consult acertified electrician.

Thelight fitting does not need to be earthed (class II).

Warning: Before beginning any

electrical installation always

disconnect thepower to

thecircuit you are working on,

either by turning off themain

circuit breaker or by removing

thefuse from theconsumer

unit. Make sure that there are

no obstructing cables or pipes

behind thewall/ceiling area

where you have planned to drill.

Installation on ceiling with alamp

socket or apre-mounted ceiling hook

1. Connect alamp plug

cable (sold separately)

to theterminal block.

2. Plug thelamp plug into

theceiling lamp socket.

3. Hang thelight onto

theceiling hook.

4. Push theceiling cup flush

against theceiling and

tighten thestrain relief

screw.

5. Screw in alight bulb

(E27, max 46W).

6. Turn thepower back on.

Installation on ceiling without alamp

socket or apre-mounted ceiling hook

1. Screw ahook capable of supporting theweight of

thelight into theceiling.

2. Connect theelectrical supply cable to theterminal

block.

3. Hang thelight onto theceiling hook.

4. Push theceiling cup flush against theceiling and

tighten thestrain relief screw.

5. Screw in alight bulb (E27, max 46W).

6. Turn thepower back on.

Responsible disposal

This symbol indicates that this product

should not be disposed of with

general household waste. This applies

throughout theentire EU. In order to

prevent any harm to theenvironment or

health hazards caused by incorrect waste

disposal, theproduct must be handed

in for recycling so that thematerial

can be disposed of in aresponsible

manner. When recycling your product,

take it to your local collection facility or

contact theplace of purchase. They will

ensure that theproduct is disposed of in

anenvironmentally sound manner.

Specifications

Supply voltage 220–240V, 50 Hz

Bulb Max 46W (sold separately)

Lamp holder E27

Mains lead 2m

Produktspecifikationer