North Light 36-6238 Bruksanvisning

Läs gratis den bruksanvisning för North Light 36-6238 (5 sidor) i kategorin Lampa. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 3 recensioner. Har du en fråga om North Light 36-6238 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

ENGLISH

GREAT BRITAIN • CUSTOMER SERVICE

tel. 0845 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk

Ver. 20160428

Dome Ceiling Light

Art.no 36-6238 Model OCL-493-WH

36-6239 OCL-493-BK

Please read theentire instruction manual before using theproduct

and then save it for future reference. We reserve theright for

any errors in text or images and any necessary changes made

to technicaldata. In theevent of technical problems or other

queries, please contact our Customer Services.

Safety

• All light fittings must be installed in accordance with

current safety regulations to prevent life-threatening

accidents. Installation should only be performed by those

with agood knowledge of electrical wiring. Contact

aqualified electrician if you do not possess therequired

knowledge to perform such aninstallation on yourown.

Follow theinstructions carefully and keep them for future

reference.

• Theceiling light is only meant to be used in clean, dry

indoor environments. Donot expose thelight fitting to

water, moisture or other liquids.

• Never attempt to repair or modify theceiling light in anyway.

• Only use adry cloth to wipe thelamp clean when needed.

• Thebulb can become very hot duringuse. Letit cool

thoroughly before changing.

Installation

Note: Ifyou are at all unsure about proper installation

procedures, seek theadvice of someone with therequisite

knowledge to help you perform such aninstallation or consult

aqualified electrician.

Thelight fitting needs not to be earthed (class II).

Warning: Before beginning any electrical

installation always disconnect thepower

to thecircuit you are working on, either by

turning off themain circuit breaker or by

removing thefuse from theconsumerunit.

Makesure that there are no obstructing

cables or pipes behind thewall/ceiling

area where you have planned todrill.

Wired installation without asocket or

apre-mounted ceilinghook

1. Use asuitable ceiling hook and screw it securely into

theceiling at anappropriate mountingpoint.

2. Connect theelectrical supply cable to thelamp’s

terminalblock. Hangup thelamp onto theceilinghook.

Pushtheceiling cup flush against theceiling and tighten

theceiling cup set screw securely.

3. Fit alight bulb (E27, max 60W).

4. Turn thepower backon.

Disposal

This product should be disposed of in accordance with local

regulations. Ifyou are unsure how to proceed, contact your

local council.

Specifications

Power supply 220–240 V, 50 Hz

Max 60 W

Base E27

Connecting theceiling light to apower

point using apre-mounted ceilinghook

1. Obtain aplug cable and connect its wires to thelamp’s

terminalblock.

2. Connect theplug to

thepower point and hang

up theceiling light onto

theceilinghook.

3. Push theceiling cup flush

against theceiling and

tighten theceiling cup set

screw securely as shown

in theillustration.

4. Fit alight bulb (E27, max

60W).

5. Turn thepower backon.

Produktspecifikationer