StarTech.com AF211C-POE-INJECTOR Bruksanvisning

StarTech.com Inte kategoriserad AF211C-POE-INJECTOR

Läs gratis den bruksanvisning för StarTech.com AF211C-POE-INJECTOR (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 9.5 recensioner. Har du en fråga om StarTech.com AF211C-POE-INJECTOR eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: May 27, 2024
Product ID
AF211C-POE-INJECTOR
Top
1-Port 802.3at 30W Gigabit PoE+ Injector
Component Function
1Mounting Holes Mount the to an appropriate surface PoE Injector
2Power Input Connect the included 6ft (1.8m) NA Power Cord
3Power LED is receiving power Solid Green: PoE Injector
4PoE+ Port
(Data + PoE)
Connect an to a Ethernet Cable PD (Powered
Device)
Supports , , and 1Gbps 100Mbps 10Mbps
Supports and 802.3af 802.3at
5Data Port Connect an to a Ethernet Cable Network Device
Supports , , and 1Gbps 100Mbps 10Mbps
Product Information
For the latest product information, technical specications, and declarations of
conformance, please visit: www.StarTech.com/AF221C-POE-INJECTOR
Requirements
Network Cables x 2
Package Contents
PoE Injector x 1
6ft (1.8m) NA Power Cord x 1
Quick-Start Guide x 1
Installation
(Optional) Mount the PoE Injector
1. Determine the and for the . Mounting Surface Location PoE Injector
2. Mount the to the desired using the appropriate PoE Injector Mounting Surface
Mounting Hardware Mounting Holes(e.g. Wood Screws) through the built-in .
Install the PoE Injector
1. Connect an from the (i.e., router, modem, or Ethernet Cable Source Network Device
non-PoE switch) to the on the . Data Port PoE Injector
2. Connect an to the on the . Ethernet Cable PoE+ Port PoE Injector
3. Connect the other end of the used in to either a Ethernet Cable Step 2 PD (Powered
Device) PoE Splitter Data Poweror a to separate and .
4. Plug the included into an and connect it to the NA Power Cord AC Outlet
Power Port, PoE Injector Power LEDlocated on the rear of the . Verify that the is
illuminated.
1
1
3
2
4 5


Produktspecifikationer

Varumärke: StarTech.com
Kategori: Inte kategoriserad
Modell: AF211C-POE-INJECTOR

Behöver du hjälp?

Om du behöver hjälp med StarTech.com AF211C-POE-INJECTOR ställ en fråga nedan och andra användare kommer att svara dig