TP Link ER605 v2 Bruksanvisning

Läs gratis den bruksanvisning för TP Link ER605 v2 (2 sidor) i kategorin Router. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 4 recensioner. Har du en fråga om TP Link ER605 v2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Installation Guide

LED Explanation

Connection

Conguration

ER605

Modem

Internet

On:Power on

O:Power o

Power/PWR

Flashing:System running normally

On/O:System running abnormally

System/SYS

Note: For simplicity, we take ER605 as an example throughout this Guide.

© 2021 TP-Link 7106509327 REV2.0.0

Omada Gigabit VPN Router

Option 1: Standalone Mode

Open a web browser and type the default management address

192.168.0.1 in the address eld of the browser, then press the Enter key.

2.

Connect a computer to a LAN port of the router with an RJ45 cable

properly. If your computer is congured with a xed IP, change it to Obtain

an IP address automatically.

1. For detailed congurations, refer to the User Guide of the router. The guide

can be found on the download center of our ocial website:

https://www.tp-link.com/support/download/.

Create a username and a password for subsequent login attempts and

for security.

3.

Use the username and password set above to log in to the webpage.4.

After a successful login, you can congure the function by clicking the

setup menu on the left side of the screen.

5.

Link/Act and 1000Mbps (for ER7206)

The router supports two conguration options:

Standalone Mode: Congure and manage the router singly.

Controller Mode: Congure and manage the network devices centrally. It is recommended in the large-scale network, which consists of mass devices such as

access points, switches, and gateways.

Note: Use the charger provided in the

package to power on the router.

On: Connecting to a device and running at 1000 Mbps

O:No device connected/connecting to a device but not running at 1000 Mbps

On: Connecting to a device but no activity

O: No device connected to the corresponding port

Flashing: Transmitting or receiving data

Router PC

In Standalone Mode, use a computer to congure and manage the router.

Link/Act (for ER605) | SFP WAN (for ER7206)

On: Connecting to a device but no activity

O: No device connected to the corresponding port

Flashing: Transmitting or receiving data

Note: When the router is managed by a controller, congurations of the router will be overriden by the controller.

USB (for ER605)

On: Connecting to a USB device

O: No USB device connected

Flashing: Identifying the connected device

Produktspecifikationer