WyreStorm EXP-SW-0401-H2 Bruksanvisning

WyreStorm Router EXP-SW-0401-H2

Läs gratis den bruksanvisning för WyreStorm EXP-SW-0401-H2 (2 sidor) i kategorin Router. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 12 recensioner. Har du en fråga om WyreStorm EXP-SW-0401-H2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

EXP-SW-0401-H2 Quickstart Guide | 210810

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

support@wyrestorm.com

1 of 2

WyreStorm Essentials 4K HDR 4x1 HDMI Switcher with

Auto-Switching, HDCP 2.2 & Remote

EXP-SW-0401-H2

IMPORTANT! Installation Requirements

• Visit the product page to download the latest rmware, document version,

additional documentation, and conguration tools.

• Read through the Wiring and Connections section for important guidelines

before creating or choosing premade cables.

In The Box

1x EXP-SW-0401-H2 Switcher

1x 12V DC Power Supply (US/UK/EU/AU)

2x Mounting Brackets

1x IR Remote Control

1 x IR Receiver Cable

Basic Wiring Diagram

WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the installation

process.

Wiring and Connections

WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the switcher. Read through this section in its

entirety before running or terminating the wires to ensure proper operation and to avoid damaging equipment.

IMPORTANT! HDMI Wiring Guidelines

• The use of patch panels, wall plates, cable extenders, kinks in cables, and electrical or environmental interference will have an adverse effect on HDMI

transmission limiting performance. Steps should be taken to minimize or remove these factors completely during installation for best results.

• WyreStorm recommends using high quality HDMI cables such as WyreStorm Essentials to ensure the highest content performance available.

Installation and Operation

1. Connect HDMI sources to the HDMI IN ports using a good quality HDMI cable.

2. Connect an HDMI display devices to the HDMI OUT port of the switcher.

Note: The switcher is powered via mains power supply to the unit. WyreStorm recommend using only power adapter supplied.

3. Turn the power on ensuring LED power indicators are fully lit on the front of the switcher. If not, check power cable is rmly connected.

Quickstart Guide

4K Blu-ray Player

Display Device

Streaming Device

Remote

Control

4K Satellite Box

Games Console

KEY

HDMI

Control

Power

Produktspecifikationer

Varumärke:	WyreStorm
Kategori:	Router
Modell:	EXP-SW-0401-H2
Vikt:	250 g
Bredd:	175 mm
Djup:	66.2 mm
Höjd:	16 mm
Maximal upplösning:	4096 x 2160 pixlar
Antal HDMI-portar:	5
Strömförbrukning (max):	3.2 W
Certifiering:	FCC, EAC, RCM
HDCP:	Ja
Färgdjup:	12 bit
Maximal räckvidd:	7 m
Rackmontering:	Ja
HDCP-version:	2.2
Antal HDMI-utgångar:	1
Rackkapacitet:	1U
Antal per förpackning:	1 styck
Temperatur vid drift:	0 - 45 ° C
Temperaturintervall (förvaring):	-20 - 70 ° C
Intervall för relativ operativ luftfuktighet:	10 - 90 %
Fuktighet (förvaring):	10 - 90 %
Dolby technologies:	Dolby Vision
Hållbarhetscertifiering:	CE, RoHS
Video porttyp:	HDMI
Max uppdateringsfrekvens:	60 hz
Harmonized System (HS)-kod:	85176990
Värmeavgivning:	10.92 BTU/h
Typ av USB-port:	USB Type-A
AC-adapter, nätspänning:	12 V
AC-adapter, maxbelastning:	1 A
HDMI-in:	4
EDID (Extended display identification data):	Ja