Axxess AXPIO-IN1 Bruksanvisning


Läs gratis den bruksanvisning för Axxess AXPIO-IN1 (20 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 1.5 recensioner. Har du en fråga om Axxess AXPIO-IN1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/20
INSTALLATION INSTRUCTIONS
AXPIO-IN1
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections, especially the air
bag indicator lights, are plugged in before
reconnecting the battery or cycling the ignition
to test this product.
NOTE: Refer also to the instructions included
with the aftermarket radio.
AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 8/26/24 INSTAXPIO-IN1
KIT FEATURES
Designed for Pioneer
®
DMHW4600NEX/W4660NEX or
DMH-WC5700NEX receivers
Complete plug-n-play installation
Retains use of the factory climate control panel
Allows visual of HVAC and gauges and adjustment of HVAC functions
and factory personalization through the Pioneer screen
Painted scratch resistant matte black
Retains factory back up camera
Retains audio controls on the steering wheel
Supported Languages include English, Spanish and French
KIT COMPONENTS
• A) Upper panel • B) Upper brackets • C) Lower brackets • D) Modular screen brackets • E) Panel clip mounts • F) White panel clips (2)
• G) #8 x 3/8” truss-head Phillips screws (2) • Not shown: Antenna adapter and harnesses
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench
TABLE OF CONTENTS
Dash Disassembly .............................................. 2-3
Kit Preparation ....................................................... 4
Kit Assembly ...................................................... 5-8
Axxess Interface Installation ..........................9-17
WIRING & ANTENNA CONNECTIONS
Wiring Harness:
Included with kit
Antenna Adapter: 40-NI12
Included with kit
A B
G
C D
F
E
Infiniti G37 2008-2013
Visit MetraOnline.com for more detailed information about the
product and up-to-date vehicle specific applications
Product Info
2
DASH DISASSEMBLY
(Figure B)
(Figure A) (Figure A)
2008-2009 vehicles:
1. Slide the shifter boot down and remove
clip holding shifter knob and remove
shifter knob. (Figure A)
2. Unclip and remove shifter boot trim
panel. (Figure B)
Continued on next page
2010-2013 vehicles:
1. Unclip and remove the trim panel from
below the factory radio controls.
(Figure A)
Continued on next page


Produktspecifikationer

Varumärke: Axxess
Kategori: ej kategoriserat
Modell: AXPIO-IN1

Behöver du hjälp?

Om du behöver hjälp med Axxess AXPIO-IN1 ställ en fråga nedan och andra användare kommer att svara dig