Axxess AXSSO-FD Bruksanvisning


Läs gratis den bruksanvisning för Axxess AXSSO-FD (8 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 1.5 recensioner. Har du en fråga om Axxess AXSSO-FD eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/8
AXSSO-FD
INSTALLATION INSTRUCTIONS
Patent #10844821, 11459994, 11493012
AxxessInterfaces.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 4/24/23 INSTAXSSO-FD
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections, especially the air
bag indicator lights, are plugged in before
reconnecting the battery or cycling the ignition
to test this product.
NOTE: Refer also to the instructions included
with the aftermarket accessory before
installing this device.
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Zip ties • Cutters (for zip ties)
• USB Micro-B cable
(Axxess part number AXUSB-MCBL)
TABLE OF CONTENTS
Programming .........................................................2
Connections ............................................................3
Operation................................................................4
Ford Stop/Start Override Interface 2015-Up
APPLICATIONS
Allows the override of the STOP/START engine feature
The factory STOP/START button can resume the STOP/START feature
Can be used with either a factory or aftermarket radio
Vehicle type configured through the Axxess Updater software program
Simple plug n’ play installation, no wiring required
The AXSSO-FD is designed to disengage the STOP/START feature of the vehicle, and keep that feature disengaged even after the key has been
cycled. The AXSSO-FD will work with either an aftermarket radio, or a factory radio. A simple plug n’ play installation is all that is required to install
the device in the vehicle, and programming through a Windows 10 computer via the Axxess Updater software program.
Ford
Bronco .............................................................2022
Edge .......................................................2015-2020
Escape ....................................................... 2017-Up
F-150..........................................................2015-Up
Focus ......................................................... 2016-Up
Fusion .......................................................2015-Up
• AXSSO-FD interface
• AXSSO-FD harness (qty. 2)
Product Info
INTRODUCTION
2
PROGRAMMING
(Figure A) (Figure B) (Figure C)
1.
2.
3.
4.
Download and install the Axxess Updater software program from:
axxessinterfaces.com/resources/updater-software
On the next screen that opens, select the year, make, and model of the
vehicle, then press Program Interface. (Figure B)
Connect the micro-B USB cable (sold separately) to the computer and
AXSSO-FD interface. Open the Axxess Updater software program and
wait until the word Ready is shown in the bottom left of the screen.
Select Stop / Start. (Figure A)
When the Configuration Successful box pops up, the programming
process is complete. (Figure C)
Continue to Installation


Produktspecifikationer

Varumärke: Axxess
Kategori: ej kategoriserat
Modell: AXSSO-FD

Behöver du hjälp?

Om du behöver hjälp med Axxess AXSSO-FD ställ en fråga nedan och andra användare kommer att svara dig