Draper 78772 Bruksanvisning
Draper
lödnings maskin
78772
Läs gratis den bruksanvisning för Draper 78772 (4 sidor) i kategorin lödnings maskin. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 5 recensioner. Har du en fråga om Draper 78772 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
SOLDERING
IRON & GAS
TORCH
GAS
TORCH
78772
78776
2 IN 1 COMPACT
EN
Original Instructions
Version 1 – March 2023
1. Specication
2. HealthandSafetyWarnings
• Observe all standard safety precautions and good
practices when working with naked ames, solder and
ammable fuels.
• Keep the work environment clear and well-lit, with
bystanders at a safe distance.
• Keep this product out of reach of children at all times.
• ALWAYS wear appropriate eye and face protection and
protective gloves when using this product.
− Take additional precautions when using chemicals
like ux or solder paste; refer to the manufacturer
instructions for safe use.
• Check the torch for damaged, clogged or corroded parts
and leaks before every use.
− DO NOT use the product if it is damaged or leaking
in any way; contact Draper Tools for repair and
replacement options.
− If you suspect that the product is leaking gas, move
it to an external environment immediately.
Important: The product can be tested for leaks by
dabbing soapy water solution on joints and
connections while gas is added to or stored in the
product. Leaks will create a steady feed of soapy
bubbles at the breach point.
• Use ONLY in well-ventilated environments.
• DO NOT use this product in environments where paint
fumes, solvents and other ammable materials are
present.
• Use only good quality butane gas.
WARNING!Butanegasishighlyammable;
handle it carefully and in accordance with the
instructions on the canister.
• During rst use, allow a few minutes for the product to
settle once ignited before directing it towards the
workpiece.
WARNING!Themetalpartsofthetorchbecome
veryhotduringuse.DONOTtouchthebarrel,
soldering tip or workpiece until they have cooled
thoroughly.
WARNING! NEVER direct the product towards
skin,clothingorotherammablematerials,or
lookdirectlydownthebarrel.
Stock No. 78772 78776
Part No. GT6 GT10
Fuel type Butane Butane
Fuel capacity 15ml 15ml
Approx. temperature 200–400°C 1,300°C
Operating time (one gas lling) 50 mins approx. at low setting 50 mins approx. at low setting
Dimensions W 53 × H 185 × D 150mm W 53 × H 175 × D 100mm
Net Weight 170g 160g
Produktspecifikationer
| Varumärke: | Draper |
| Kategori: | lödnings maskin |
| Modell: | 78772 |
Behöver du hjälp?
Om du behöver hjälp med Draper 78772 ställ en fråga nedan och andra användare kommer att svara dig
lödnings maskin Draper Manualer
26 September 2025
25 September 2025
25 September 2025
25 September 2025
lödnings maskin Manualer
- Gude
- Dremel
- Weller
- Toolcraft
- RIDGID
- Dedra
- Rothenberger
- PCE Instruments
- NEO Tools
- Ersa
- Topex
- Stamos
- MKC
- Lebenlang
Nyaste lödnings maskin Manualer
19 Oktober 2025
6 Oktober 2025
20 September 2025
12 September 2025
9 September 2025
9 September 2025
9 September 2025
4 September 2025
1 September 2025
31 Augusti 2025