IPEGA PG-P5S028 Bruksanvisning
IPEGA
ej kategoriserat
PG-P5S028
Läs gratis den bruksanvisning för IPEGA PG-P5S028 (1 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 1.5 recensioner. Har du en fråga om IPEGA PG-P5S028 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
多功能座充
中文说明书( )PG-P5S028
1. 本产品适用于P5/P5 Slim主机散热及P5原装手柄充电。
2. 具备两个低噪声散热风扇。
3. 风扇档位开关可以控制散热风扇在3档不同的风速下工作并显示出不同的风扇背景灯光效果。
4. 具备一个P5主机扩展USB口。
耳机支架插孔
散热风扇口
多媒体遥控器槽
主机放置槽
电源线
风力档位指示灯
手柄充电指示灯
扩展USB接口
固定螺丝
游戏卡槽
手柄充电槽B
手柄充电槽A
散热风扇开关
适用说明:
1. 将固定螺栓插入座充的固定孔中，将P5主机对准固定螺栓竖直放置在座充上并拧紧螺栓，然后将
座充供电线上的Type-C头插入到P5主机前置Type-C口中。
2. 当P5主机处于开机状态，无手柄放置于座充上充电时，充电状态指示灯区原装手柄图案呈蓝色。
3. 当有P5原装手柄放置到手柄充电槽里时，相应位置的手柄充电图案会呈现红色，手柄充满电后，
手柄充电图案会呈现蓝色。
4. 按一下风扇开关，散热风扇进入1档工作状态，同时风扇1档指示灯亮起，风扇背景灯亮蓝色；
再按一下风扇开关，散热风扇进入2档工作状态，同时风扇2档指示灯亮起，风扇背景灯亮绿色；
再按一下风扇开关，散热风扇进入3档工作状态，同时风扇3档指示灯亮起，风扇背景灯亮红色；
再按一下风扇开关，散热风扇停止工作，同时风扇指示灯与背景灯熄灭。
5. 扩展USB接口规格为USB2.0。
设备使用说明:
1. 本产品充电功能专为P5原装手柄设计，请勿使用本产品给其他型号手柄充电。
2. 受限于P5前置USB口供电能力，当本产品同时为两个P5手柄充电并开启散热风扇时，本产品扩
展USB口供电能力会下降，此时如需使用扩展USB口连接P5手柄，请避免使用过长（超过1.2米）
的数据线。
底座 x1 耳机支架 x1 说明书 x1固定螺丝 x1
注意事项：
产品清单：
1. 输入： DC 5V/2A
2. 输出： DC 5V/1.8A
3. P5手柄充电电流：≤600mA
4. P5手柄充电时间：约4小时
电性参数：
产品外观图示:
VERTICAL STAND
User manual( )PG-P5S028
1. This product is suitable for cooling the P5/P5 Slim console and charging the P5 original controller.
2. It is equipped with two low-noise cooling fans.
3. The fan speed switch can control the cooling fans to operate at three different speeds and
display different fan backlighting effects.
4. It has an additional USB port for expanding the P5 console.
Headphone stand jack
Cooling fan
Multimedia remote
controller slot
Console slot
Power
cable
Speed indicator
Charging indicator
Extended USB port
Fixing screws
Game
card slot
Handle
charging slot B
Handle
charging slot A
Cooling fan button
Application Instruction:
1. Insert the fixed bolt into the designated hole of the charging dock. Align the P5 console with
the fixed bolt and place it vertically on the charging dock. Tighten the bolt. Then, insert the
Type-C end of the power cable from the charging dock into the front Type-C port of the P5
console.
2. When the P5 console is turned on and no controller is placed on the charging dock for charging,
the charging status indicator area with the original controller icon will be blue.
3. When an original P5 controller is placed in the controller charging slot, the corresponding
position's controller charging icon will turn red. Once the controller is fully charged, the controller
charging icon will turn blue.
4. Press the fan switch once to activate the cooling fan at the first speed level. The fan speed
indicator for the first level will light up, and the fan background light will be blue. Press the fan
switch again to switch to the second speed level, and the second speed indicator will light up
with a green fan background light. Press the fan switch once more to switch to the third speed
level, and the third speed indicator will light up with a red fan background light. Press the fan
switch again to turn off the fan, and both the fan indicator and the background light will turn off.
5. The specification for the expansion USB ports is USB 2.0.
Operation instructions:
1. The charging function of this product is designed exclusively for the P5 original controller. Please
do not use this product to charge other models of controllers.
2. Due to the limited power capacity of the P5 front USB port, when this product is simultaneously
charging two P5 controllers and running the cooling fans, the power capacity of the expansion
USB port of this product will decrease. In such cases, if you need to use the expansion USB port
to connect the P5 controller, please avoid using data cables that are too long (over 1.2 meters).
Charging base x1 Headphone bracket x1 Manual x1Fixing screws x1
Notes:
Accessories List
1. Input: DC 5V/2A
2. Output: DC 5V/1.8A
3. P5 Controller charging current: ≤600mA
4. P5 Controller charging time: Approx 4H
Electrical Parameter:
Product Overview
Produktspecifikationer
| Varumärke: | IPEGA |
| Kategori: | ej kategoriserat |
| Modell: | PG-P5S028 |
Behöver du hjälp?
Om du behöver hjälp med IPEGA PG-P5S028 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat IPEGA Manualer
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
ej kategoriserat Manualer
- Jilong
- Oster
- LOKUKA
- ESX
- Navman
- BodyCraft
- Calor
- JET
- Salton
- Sigma
- OnTruss
- Danby
- Delonghi
- Testec
- Levenhuk
Nyaste ej kategoriserat Manualer
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025