IPEGA PG-P5V002 Bruksanvisning


Läs gratis den bruksanvisning för IPEGA PG-P5V002 (1 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 1.5 recensioner. Har du en fråga om IPEGA PG-P5V002 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
产品外
VR头戴支撑架
充电接头收
VR手柄充电槽R
VR手柄充电槽L
充电指灯L
充电指灯R
充电开关
P5手柄充电槽R
RGB发光灯带
灯光控制开关
VR头戴放
维码(ipega)
取更多产品官方客服技术支持
P5 VR 2 多功能座充
产品明书(PG-P5V002L)
产品明:
1.本产品可供VR头戴、VR手柄、
P5手柄(兼容精英版手柄)、机收使用。
2.可供VR手柄、P5手柄(兼容精英版手柄)充电使用。
3.构布局,简洁实用。
4.备一条双USB-A头充电线,充电座供电。
5.具备2个USB充电扩展接口。
6.带有炫彩RGB灯效。
电性参数
1.DC 5V/3A
2.DC 5.2V/2.8A
3.VR充电电流550mA(单个手柄)
4.VR充电时间:约1.5小时
5.P5手柄充电电流650mA(单个手柄)
6.P5手柄充电时间:约3小时
电源入接口
充电出接口1-2
加入官方技术支持微信关注派鲨鱼微信公众号
产品装配说明:
产品使用明:
1.手柄充电时请确保将手柄正到手柄充电槽中
2.注意P5精英版手柄上杠杆式背面键时无法充电
3.TYPE-C为充电入接口USB为充电出接口,请勿反接
4.注意将充电接头完全插入VR2手柄;
5.本产品具有充电保护功: 检测出现短路手柄放反的情况
动断电,若无法充电,请将手柄从底座取下并以正
的方式新放以使底座恢复工作;
6.不靠近火或其它热源的地方使用
7.专业人员拆卸本产品,否则不在售后保修服务内
8.把本产品在潮湿或温地方存储。
1.将产品各件依装配组装带的
Type-C充电线连接本产品Type-C接口与P5
主机后的两个USB接口。
2.“P5手柄充电槽L”与“P5手柄充电槽R”
可以P5手柄充电充电时对应的“P5手柄充电指灯L”与“P5手柄充电指
R”会亮红色,充满电时亮蓝色
3.将产品备的吸头插入VR手柄Type-C接口“VR手柄充电槽L”与“VR手柄充
电槽R”可以通过磁吸头VR手柄充电充电时对应的“VR手柄充电指灯L”与
“VR手柄充电指灯R”会亮红色,充满电时亮蓝色
4.RGB有10灯光效果 1、跑马2、光循环3、七色跳4、红色常亮
5、绿色常亮6、蓝色常亮7、黄绿色常亮8、青色常亮9、紫色常亮10、白
常亮。
按RGB灯效切换可以在10灯光效果与熄灯之依次切换断电时会动保存当
前灯光模式,长按三RGB灯效切换会保存当前灯效并关RGB灯再次按RGB
灯效切换时开启已保存的灯光模式。
5.手柄充电控制开关可开启、关手柄充电功与充电指灯。
6.本产品后有两个USB充电出接口(无数据接功能)
将充电座的三个件按以下方法装配
注意事项:
底座 x1
产品清单
明书 x1 充电接头 x4 充电线 x1
2
3
1
用于P5手柄与P5手柄精英
Product illustration
VR headset stand
Charging adapter
storage
VR controller
charging slot R
VR controller
charging slot L
Charging
indicator L
Charging indicator R
Charging on/off
P5 controller
charging slot L
P5 controller
charging slot R
Light bar
Light on/off
VR headset stand
Charging Station for PS
VR 2 & P5 Controllers
User Manual(PG-P5V002L)
Product Description
1. This product can be used for storage of VR
headset, VR controller and P5 controller.
2. Charging for VR headset, VR controller
and P5 controller
3. The structural layout is compact, simple and practical.
4. Equipped with a charging cable with two USB-A plug.
5. With 2 USB data expansion ports
6. Dazzling RGB light effect.
1.Assemble the product components according to
the assembly diagram. Please use the accompanying
charging cable to power the product from the USB port
of P5 console.
Specifications
1. Input : DC 5V/3A
2. Output: DC 5.2V/2.8A
3. VR controller charging current: 550mA (single)
4. VR controller charging hours: ~1.5 hours
5. P5 controller charging current: 650mA (single)
6. P5 controller charging hours: ~3 hours
AC power port
Charging port(output)1-2
Assembly Instructions:
Product instructions:
Step-By-Step Assembly Instructions
Note
Charging Stand x1
Product List
Manual x1 Charging adapter x4 Charging Cable x1
2
3
1
Compatible with P5 controller and
P5 edge controller
2. "P5 controller charging slot L" and "P5 controller charging slot R" can be used to charge
the P5 controller. When charging, the corresponding "P5 controller charging indicator L" and
"P5 controller charging indicator R" will light up in red, and turn blue when fully charged.
3. Insert the magnetic head provided with the product into the Type-C interface of the VR
controller. "VR controller charging slot L" and "VR controller charging slot R" can be used to
charge the VR controller through the magnetic head. When charging, the corresponding "VR
controller charging indicator L" and "VR controller charging indicator R" will light up in red, and
turn blue when fully charged.
4. Total 10 lighting effect will switch in sequence: 1. Horse racing lamp, 2. Spectrum cycle, 3.
Seven-color jump, 4. Red constant light, 5. Green constant light, 6. Blue constant light,
7.Yellow-green constant light, 8. Cyan constant light, 9. Purple constant light, 10. White
constant light.
Short press the RGB light effect switch key to switch among the 10 lighting effects and turn off
the lights. When the power is off, the current light mode will be saved automatically. Long
press the RGB light effect switch key for three seconds to save the current light effect and
turn off the RGB light. When the RGB light effect is switched again, the saved light mode will
be turned on.
1. When charging the controller, please make sure to correctly place
it into the controller charging slot.
2. Please note that the P5 Elite Edition controller cannot be charged
when equipped with lever-style back buttons.
3. TYPE-C is the charging input interface, and USB is the charging
output interface. Do not reverse the connections.
4. Please make sure to fully insert the charging adapter into the VR2
controller.
5. This product has charging protection function: if a short circuit or
reverse placement of the controller is detected, it will automatically
shut off. If charging is not possible, please try removing the controller
from the base and correctly re-placing it to restore the base's
functionality.
6. Please keep away the fire or heating area while charging the controller.
7. Non professional personnel should not disassemble the product, otherwise it will
not be covered in the after-sales warranty service.
8. Please do not store this product in wet or high-temperature areas.
5. Controller charging control switch: can turn on or off the controller charging
function and charging indicators.
6. Two USB charging output (without data connection function)


Produktspecifikationer

Varumärke: IPEGA
Kategori: ej kategoriserat
Modell: PG-P5V002

Behöver du hjälp?

Om du behöver hjälp med IPEGA PG-P5V002 ställ en fråga nedan och andra användare kommer att svara dig