Pro-Ject Stereo Box S2ilver High End Integrated Amplifier Bruksanvisning

Pro-Ject mottagare Stereo Box S2ilver High End Integrated Amplifier

Läs gratis den bruksanvisning för Pro-Ject Stereo Box S2ilver High End Integrated Amplifier (4 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 3.5 recensioner. Har du en fråga om Pro-Ject Stereo Box S2ilver High End Integrated Amplifier eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
INSTRUCTIONS FOR USE
Pro-Ject Stereo Box S2
© Pro-Ject Audio Systems · Pro-Ject Stereo Box S2 · Revision 8. . 201 10 25
2
Dear music lover,
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse
Important notice
Safety instructions
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply is easily
accessible at all times. Never handle the device, the power supply while your hands are wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such
as a flower vase on or near the device. Never spill any liquid on the device or the power supply. Never
place any naked flame sources, such as lighted candles on or near the device. The product shall not be used
in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Connectors
Make all connections whilst the amplifier is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red, the
left channel black or white.
Never use any other power supply than the one supplied with the unit.
Inputs
Line level sources such as CD player radio or TV can be connected to the input RCA sockets marked ,
In
In
In
InIn1
1
1
11 In
In
In
InIn2
2
2
2 2
and also to the stereo 3.5mm jack socket
I
I
I
IIn3.
n3.
n3.
n3.n3.
Connection to the speakers
The output terminals accept loudspeaker cables terminated with 4mm Banana plugs, spades connectors
or naked wire.
Variable output
A power amplifier or active loudspeakers can be connected to the output sockets marked .
Varia
Varia
Varia
VariaVariable
ble
ble
bleble Out
Out
Out
OutOut
Mains power connection
Connect the low voltage plug from the power supply to the socket of the amplifier before
Power
Power
Power
Power Power V
V
V
V V
20
20
20
2020 DC
DC
DC
DCDC
connecting the power supply to the mains.
© Pro-Ject Audio Systems · Pro-Ject Stereo Box S2 · Revision 8. . 201 10 25
3
Front panel controls
To switch on from standby or to standby
The push button on the left hand side will toggle the phono amplifier between its fully operational status and
standby. The blue LED above the stand-by push button shows that the unit is switched on.
Input selector
Press the push button next to the 3 LEDs to switch between the inputs. Selected input number will be illuminated.
Volume
Adjust the volume to the desired level, using the large knob on the front panel.
Remote control
turns the unit on or back into standby (long press), mute (short)
and adjust the sound volume
and select the inputs
Replacing batteries
Proceed as follows:
Unlock and slide open the battery case cover
Replace the battery.
Make sure the battery is the right way round !
Close the battery case cover
Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at
the appropriate collection sites - usually located at supermarkets and drugstores.


Produktspecifikationer

Varumärke: Pro-Ject
Kategori: mottagare
Modell: Stereo Box S2ilver High End Integrated Amplifier

Behöver du hjälp?

Om du behöver hjälp med Pro-Ject Stereo Box S2ilver High End Integrated Amplifier ställ en fråga nedan och andra användare kommer att svara dig