Mount-It! MI-14010 Bruksanvisning

Läs gratis den bruksanvisning för Mount-It! MI-14010 (7 sidor) i kategorin Platt panelstöd. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 11.5 recensioner. Har du en fråga om Mount-It! MI-14010 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/7
HEAVY-DUTY FULL-MOTION
TV WALL MOUNT
MI-14010
Scan this QR code for
product information, videos,
and assembly assistance.
Thank you for choosing Mount-It
2
Mount-It!
Mount-It!
Mount and Accessories
4
• Use a stud nder to locate the center of the studs and hold the Template (#E) to the wall in the desired
mounting location.
• Use a Bubble Level (#D) to ensure that the mount is level.
• Mark the center of the studs through the Template as shown.
• Drill holes in the marked locations using a 1/4” drill bit (6mm) to a depth of 3.5” (90mm)
• Hold the Wall Mount (#A) to the wall over the holes, check the level once again, and install the 4 Lag
Screws (#W-A) and Washers (#W-C) then tighten until secure.
Wood Stud Installation Option
Step 1a Step 1b

Produktspecifikationer

Varumärke: Mount-It!
Kategori: Platt panelstöd
Modell: MI-14010

Behöver du hjälp?

Om du behöver hjälp med Mount-It! MI-14010 ställ en fråga nedan och andra användare kommer att svara dig