Mount-It! MI-395 Bruksanvisning
Mount-It!
Platt panelstöd
MI-395
Läs gratis den bruksanvisning för Mount-It! MI-395 (7 sidor) i kategorin Platt panelstöd. Guiden har ansetts hjälpsam av 28 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 14.5 recensioner. Har du en fråga om Mount-It! MI-395 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
FIREPLACE TV MOUNT
MI-395
MI-395WHT
Scan this QR code for
product information, videos,
and assembly assistance.
Thank you for choosing Mount-It
2
3
COMPATIBLE VESA SIZES
COMPATIBLE WITH
TVs UP TO
Mount-It!
Mount-It!
PACKAGE CONTENTS
VESA HARDWARE
WALL MOUNTING HARDWARE
WALL PLATE
VESA BRACKETS
PLASTIC
PLATE
ALLEN WRENCH WRENCH
RATCHET
WRENCH
WALL
TEMPLATE
BUBBLE
LEVEL
RATCHET
BIT
CROSS BAR PULL HANDLE
ST3x6
DECORATIVE COVER
SPRING ARM TV BRACKET
Missing Parts? Call us at (855) 925-5668 and we will ship replacement parts free of charge.
CHOKING HAZARD. Package includes small parts.
Not for children under 3 years. Adult supervision is required.
Check carefully to make sure there are no missing or defective parts. Some hardware provided may
not be used. Use the correct wall mounting and TV mounting hardware suitable for your installation.
B. Mantel
Clearance
TV Height
C. Min. Wall
Space Height
5
Attach the Spring Arm (B) and Wall Plate (A) with bolts (4 x I) as shown, using the Allen Wrench (Q) to
tighten securely.
4
Installing The Spring Arm To The Wallplate
The height of the mount is dependent on the depth of the mantel to ensure the spring arm clears the
mantel when fully lowered.
Determine the proper wall placement using the chart below.
Measure the depth of your mantel and locate the closest measurement in column A that your mantel
depth is Smaller Than Or Equal To. The corresponding measurement in column B "Mantel Clearance"
indicates the minimum required mounting height to properly clear the
mantel. Use Column C "Min. Wall Space Height" to calculate the space
your TV+Mount requires. Ensure that the measurement from Column C
is less than your total wall space as measured from mantel to ceiling.
Include any attached soundbars in the TV Height measurement.
Note: Installing below the required mounting height for
your mantel depth will prevent the mount from fully
clearing the mantel.
Positioning The Mount Over The Fireplace
Placing Washer (J) on the 3 exposed bolts on the Spring Arm (B) attach TV BRACKET (C) as shown
then secure with Washer (K) and Nut (L). Use Wrench (T) to tighten securely.
Installing The TV Bracket To The Spring Arm
Install Plastic Plate (H) to cover the nuts from the previous step inserting Bolt (M) from the opposite side
as shown using a screwdriver to tighten.
Attaching The Plastic Plate To The TV Bracket
Use a stud finder to locate 2 drywall studs and mark the location with a pencil. Using a bubble level to
ensure straightness, hold the Wall Template (U) to the wall at required mounting height determined by
step 3. Mark the center of the template holes which align with the center of each stud.
Use a 3/16" (4.5mm) drill bit to drill pilot holes on the wall with a depth of 2.2" (55mm). Please note,
failure to drill pilot holes may result in the lag bolt heads snapping during installation.
Holding the mount to the wall aligned with the pilot holes install Washer (W-C) and Lag Bolt (W-A) and
tighten securely. Do not overtighten. Overtightening can damage the lag bolts, greatly reducing their
holding power.
NOTE: This step may require assistance of 1 or more persons to hold heavy parts in place.
CAUTION: DO NOT INSTALL ON DRY WALL ALONE. INSTALL MOUNT ON WOOD STUDS. USER
MUST VERIFY THE WALL CAN HOLD THE WEIGHT OF THE TV AND THE TV MOUNT.
WARNING:Tighten screws so that the wall plate is firmly attached, but do not overtighten. Overtightening
can damage screws, greatly reducing their holding power.
Option 1. Wood Studs Installation
HEAVY! You may need
assistance with this step.
Step 1 Step 3
Step 4
Step 2
A. Mantel Depth
C. Min. Wall
Space Height
B. Mantel
Clearance
≤5 inches
≤9.8 inches
≤11.8 inches
≤13.8 inches
1.2 inches
3 inches
4 inches
5 inches
TV Height + 11.5"
TV Height + 14.5"
TV Height + 15"
TV Height + 16.5"
A. Mantel
Depth
Produktspecifikationer
| Varumärke: | Mount-It! |
| Kategori: | Platt panelstöd |
| Modell: | MI-395 |
Behöver du hjälp?
Om du behöver hjälp med Mount-It! MI-395 ställ en fråga nedan och andra användare kommer att svara dig
Platt panelstöd Mount-It! Manualer
2 April 2025
2 April 2025
2 April 2025
22 Mars 2025
27 December 2024
27 December 2024
27 December 2024
27 December 2024
24 September 2024
24 September 2024
Platt panelstöd Manualer
- Da-Lite
- GPX
- Hitachi
- Sanus
- Equip
- V7
- Ultimate
- BenQ
- Rocstor
- StarTech.com
- Helder
- ViewZ
- Elite Screens
- DQ
- Avteq
Nyaste Platt panelstöd Manualer
8 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025